Stability of SARS-CoV-2 on inanimate surfaces: A review.

The stability of SARS-CoV-2 for varying periods on a wide range of inanimate surfaces has raised concerns about surface transmission; however, there is still no evidence to confirm this route. In the present review, three variables affecting virus stability, namely temperature, relative humidity (RH), and initial virus titer, were considered from different experimental studies. The stability of SARS-CoV-2 on the surfaces of six different contact materials, namely plastic, metal, glass, protective equipment, paper, and fabric, and the factors affecting half-life period was systematically reviewed. The results showed that the half-life of SARS-CoV-2 on different contact materials was generally 2-10 h, up to 5 d, and as short as 30 min at 22 °C, whereas the half-life of SARS-CoV-2 on non-porous surfaces was generally 5-9 h d, up to 3 d, and as short as 4 min at 22 â„ƒ. The half-life on porous surfaces was generally 1-5 h, up to 2 d, and as short as 13 min at 22 °C. Therefore, the half-life period of SARS-CoV-2 on non-porous surfaces is longer than that on porous surfaces, and thehalf-life of the virus decreases with increasing temperature, whereas RH produces a stable negative inhibitory effect only in a specific humidity range. Various disinfection precautions can be implemented in daily life depending on the stability of SARS-CoV-2 on different surfaces to interrupt virus transmission, prevent COVID-19 infections, and avoid over-disinfection. Owing to the more stringent control of conditions in laboratory studies and the lack of evidence of transmission through surfaces in the real world, it is difficult to provide strong evidence for the efficiency of transmission of the contaminant from the surface to the human body. Therefore, we suggest that future research should focus on exploring the systematic study of the entire transmission process of the virus, which will provide a theoretical basis for optimizing global outbreak prevention and control measures.

Stability of SARS-CoV-2 on Inanimate Surfaces: A Review

The stability of SARS-CoV-2 for varying periods on a wide range of inanimate surfaces has raised concerns about surface transmission;however, there is still no evidence to confirm this route. In the present review, three variables affecting virus stability, namely temperature, relative humidity (RH), and initial virus titer, were considered from different experimental studies. The stability of SARS-CoV-2 on the surfaces of six different contact materials, namely plastic, metal, glass, protective equipment, paper, and fabric, and the factors affecting half-life period was systematically reviewed. The results showed that the half-life of SARS-CoV-2 on different contact materials was generally 2–10 h, up to 5 d, and as short as 30 min at 22°C, whereas the half-life of SARS-CoV-2 on non-porous surfaces was generally 5–9 h d, up to 3 d, and as short as 4 min at 22℃. The half-life on porous surfaces was generally 1–5 h, up to 2 d, and as short as 13 min at 22°C. Therefore, the half-life period of SARS-CoV-2 on non-porous surfaces is longer than that on porous surfaces, and thehalf-life of the virus decreases with increasing temperature, whereas RH produces a stable negative inhibitory effect only in a specific humidity range. Various disinfection precautions can be implemented in daily life depending on the stability of SARS-CoV-2 on different surfaces to interrupt virus transmission, prevent COVID-19 infections, and avoid over-disinfection. Owing to the more stringent control of conditions in laboratory studies and the lack of evidence of transmission through surfaces in the real world, it is difficult to provide strong evidence for the efficiency of transmission of the contaminant from the surface to the human body. Therefore, we suggest that future research should focus on exploring the systematic study of the entire transmission process of the virus, which will provide a theoretical basis for optimizing global outbreak prevention and control measures.

Early warning signals for Omicron outbreaks in China: a retrospective study.

The Omicron variant has become the dominant COVID-19 variant worldwide due to its rapid and cryptic spread; therefore, successful early warning is of great importance to be able to control epidemics in their early phase, before developing into large outbreaks. COVID-19-related Baidu search index, which reflects human behavior to a certain degree, was used to retrospectively detect the warning signs for Omicron variant outbreaks in China in 2022. The characteristics and effects of warning signs were analyzed in detail. We detected the presence of early warning signs (both high and low thresholds) and found that these occurred 4-7 days earlier than traditional epidemiological surveillance and >20 days earlier than the implementation of the local "lockdown" policy. Compared with the "high threshold" warning, the early warning effect of the "low threshold" is also vital because it indicates a complacency about epidemic prevention and control. However, there is obvious heterogeneity in the optimal threshold for detecting early warning signs and their distribution in different cities. Multi-source and multi-point early warning systems should be established via combining internet-based big data in the future to conduct effective and early real-time warning. This would create precious time for the early control of COVID-19 outbreaks. This article is protected by copyright. All rights reserved.

Optimizing the nucleic acid screening strategy to mitigate regional outbreaks of SARS-CoV-2 Omicron variant in China: a modeling study.

BACKGROUND: The Omicron variant of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spreads rapidly and insidiously. Coronavirus disease 2019 (COVID-19) screening is an important means of blocking community transmission in China, but the costs associated with testing are high. Quarantine capacity and medical resources are also threatened. Therefore, we aimed to evaluate different screening strategies to balance outbreak control and consumption of resources. METHODS: A community network of 2000 people, considering the heterogeneities of household size and age structure, was generated to reflect real contact networks, and a stochastic individual-based dynamic model was used to simulate SARS-CoV-2 transmission and assess different whole-area nucleic acid screening strategies. We designed a total of 87 screening strategies with different sampling methods, frequencies of screening, and timings of screening. The performance of these strategies was comprehensively evaluated by comparing the cumulative infection rates, the number of tests, and the quarantine capacity and consumption of medical resource, which were expressed as medians (95% uncertainty intervals, 95% UIs). RESULTS: To implement COVID-19 nucleic acid testing for all people (Full Screening), if the screening frequency was four times/week, the cumulative infection rate could be reduced to 13% (95% UI: 1%, 51%), the miss rate decreased to 2% (95% UI: 0%, 22%), and the quarantine and medical resource consumption was lower than higher-frequency Full Screening or sampling screening. When the frequency of Full Screening increased from five to seven times/week (which resulted in a 2581 increase in the number of tests per positive case), the cumulative infection rate was only reduced by 2%. Screening all people weekly by splitting them equally into seven batches could reduce infection rates by 73% compared to once per week, which was similar to Full Screening four times/week. Full Screening had the highest number of tests per positive case, while the miss rate, number of tests per positive case, and hotel quarantine resource consumption in Household-based Sampling Screening scenarios were lower than Random Sampling Screening. The cumulative infection rate of Household-based Sampling Screening or Random Sampling Screening seven times/week was similar to that of Full Screening four times/week. CONCLUSIONS: If hotel quarantine, hospital and shelter hospital capacity are seriously insufficient, to stop the spread of the virus as early as possible, high-frequency Full Screening would be necessary, but intermediate testing frequency may be more cost-effective in non-extreme situations. Screening in batches is recommended if the testing capacity is low. Household-based Sampling Screening is potentially a promising strategy to implement.

Optimization of COVID-19 prevention and control measures during the Beijing 2022 Winter Olympics: a model-based study.

BACKGROUND: The continuous mutation of severe acute respiratory syndrome coronavirus 2 has made the coronavirus disease 2019 (COVID-19) pandemic complicated to predict and posed a severe challenge to the Beijing 2022 Winter Olympics and Winter Paralympics held in February and March 2022. METHODS: During the preparations for the Beijing 2022 Winter Olympics, we established a dynamic model with pulse detection and isolation effect to evaluate the effect of epidemic prevention and control measures such as entry policies, contact reduction, nucleic acid testing, tracking, isolation, and health monitoring in a closed-loop management environment, by simulating the transmission dynamics in assumed scenarios. We also compared the importance of each parameter in the combination of intervention measures through sensitivity analysis. RESULTS: At the assumed baseline levels, the peak of the epidemic reached on the 57th day. During the simulation period (100 days), 13,382 people infected COVID-19. The mean and peak values of hospitalized cases were 2650 and 6746, respectively. The simulation and sensitivity analysis showed that: (1) the most important measures to stop COVID-19 transmission during the event were daily nucleic acid testing, reducing contact among people, and daily health monitoring, with cumulative infections at 0.04%, 0.14%, and 14.92% of baseline levels, respectively (2) strictly implementing the entry policy and reducing the number of cases entering the closed-loop system could delay the peak of the epidemic by 9 days and provide time for medical resources to be mobilized; (3) the risk of environmental transmission was low. CONCLUSIONS: Comprehensive measures under certain scenarios such as reducing contact, nucleic acid testing, health monitoring, and timely tracking and isolation could effectively prevent virus transmission. Our research results provided an important reference for formulating prevention and control measures during the Winter Olympics, and no epidemic spread in the closed-loop during the games indirectly proved the rationality of our research results.

High-fidelity Cas13 variants for targeted RNA degradation with minimal collateral effects.

CRISPR-Cas13 systems have recently been used for targeted RNA degradation in various organisms. However, collateral degradation of bystander RNAs has limited their in vivo applications. Here, we design a dual-fluorescence reporter system for detecting collateral effects and screening Cas13 variants in mammalian cells. Among over 200 engineered variants, several Cas13 variants including Cas13d and Cas13X exhibit efficient on-target activity but markedly reduced collateral activity. Furthermore, transcriptome-wide off-targets and cell growth arrest induced by Cas13 are absent for these variants. High-fidelity Cas13 variants show similar RNA knockdown activity to wild-type Cas13 but no detectable collateral damage in transgenic mice or adeno-associated-virus-mediated somatic cell targeting. Thus, high-fidelity Cas13 variants with minimal collateral effects are now available for targeted degradation of RNAs in basic research and therapeutic applications.

Challenges in the control of COVID-19 outbreaks caused by the delta variant during periods of low humidity: an observational study in Sydney, Australia.

BACKGROUND: Since the appearance of severe acute respiratory coronavirus 2 (SARS-CoV-2) and the coronavirus disease 2019 (COVID-19) pandemic, a growing body of evidence has suggested that weather factors, particularly temperature and humidity, influence transmission. This relationship might differ for the recently emerged B.1.617.2 (delta) variant of SARS-CoV-2. Here we use data from an outbreak in Sydney, Australia that commenced in winter and time-series analysis to investigate the association between reported cases and temperature and relative humidity. METHODS: Between 16 June and 10 September 2021, the peak of the outbreak, there were 31,662 locally-acquired cases reported in five local health districts of Sydney, Australia. The associations between daily 9:00 am and 3:00 pm temperature (°C), relative humidity (%) and their difference, and a time series of reported daily cases were assessed using univariable and multivariable generalized additive models and a 14-day exponential moving average. Akaike information criterion (AIC) and the likelihood ratio statistic were used to compare different models and determine the best fitting model. A sensitivity analysis was performed by modifying the exponential moving average. RESULTS: During the 87-day time-series, relative humidity ranged widely (< 30-98%) and temperatures were mild (approximately 11-17 °C). The best-fitting (AIC: 1,119.64) generalized additive model included 14-day exponential moving averages of 9:00 am temperature (P < 0.001) and 9:00 am relative humidity (P < 0.001), and the interaction between these two weather variables (P < 0.001). Humidity was negatively associated with cases no matter whether temperature was high or low. The effect of lower relative humidity on increased cases was more pronounced below relative humidity of about 70%; below this threshold, not only were the effects of humidity pronounced but also the relationship between temperature and cases of the delta variant becomes apparent. CONCLUSIONS: We suggest that the control of COVID-19 outbreaks, specifically those due to the delta variant, is particularly challenging during periods of the year with lower relative humidity and warmer temperatures. In addition to vaccination, stronger implementation of other interventions such as mask-wearing and social distancing might need to be considered during these higher risk periods.

Rapid screening and identification of viral pathogens in metagenomic data.

BACKGROUND: Virus screening and viral genome reconstruction are urgent and crucial for the rapid identification of viral pathogens, i.e., tracing the source and understanding the pathogenesis when a viral outbreak occurs. Next-generation sequencing (NGS) provides an efficient and unbiased way to identify viral pathogens in host-associated and environmental samples without prior knowledge. Despite the availability of software, data analysis still requires human operations. A mature pipeline is urgently needed when thousands of viral pathogen and viral genome reconstruction samples need to be rapidly identified. RESULTS: In this paper, we present a rapid and accurate workflow to screen metagenomics sequencing data for viral pathogens and other compositions, as well as enable a reference-based assembler to reconstruct viral genomes. Moreover, we tested our workflow on several metagenomics datasets, including a SARS-CoV-2 patient sample with NGS data, pangolins tissues with NGS data, Middle East Respiratory Syndrome (MERS)-infected cells with NGS data, etc. Our workflow demonstrated high accuracy and efficiency when identifying target viruses from large scale NGS metagenomics data. Our workflow was flexible when working with a broad range of NGS datasets from small (kb) to large (100 Gb). This took from a few minutes to a few hours to complete each task. At the same time, our workflow automatically generates reports that incorporate visualized feedback (e.g., metagenomics data quality statistics, host and viral sequence compositions, details about each of the identified viral pathogens and their coverages, and reassembled viral pathogen sequences based on their closest references). CONCLUSIONS: Overall, our system enabled the rapid screening and identification of viral pathogens from metagenomics data, providing an important piece to support viral pathogen research during a pandemic. The visualized report contains information from raw sequence quality to a reconstructed viral sequence, which allows non-professional people to screen their samples for viruses by themselves (Additional file 1).